HA3-BO-24-450-1B1-DC [Carling Technologies]
Circuit Breaker; 断路器
| 型号： | HA3-BO-24-450-1B1-DC |
| 厂家： | 
Carling Technologies |
| 描述： | Circuit Breaker |
| 文件： | 总16页 (文件大小：4815K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
H-Series
Circuit Breaker
The H-Series hydraulic/magnetic circuit breaker
provides dependable circuit protection in a low
cost, compact package. By meeting the IEC spacing
requirements, the H-Series is the ideal choice for
international market applications. It also features a
“trip-free” mechanism, which will open the contacts
when a fault condition occurs, even if the handle
is held in the ON position. Although a low cost
option, the H-Series was designed for maximum
performance and reliable equipment protection
meeting Carling’s stringent quality standards.
Key Features & Benefits:
Choice of actuator styles
UL1077, CCC, CSA, C22.2 and EN60934 approvals
Compact size
CURVED ROCKER ACTUATOR
o
o
Temperature stable operation -40 c to 80 c
Choice of terminals, including PCB
Single or multi-pole configurations
HANDLE ACTUATOR
FLAT WITH PUSH–TO–RESET ACTUATOR
CURVED ROCKER WITH GUARD
Product Bulletin #139
January 2012
Carling Technologies, Inc.
60 Johnson Avenue • Plainville, CT 06062-1177
Phone: (860) 793-9281 • Fax: (860) 793-9231
Email: sales@carlingtech.com • www.carlingtech.com
|
2
H-Series – General Specifications
Electrical Tables
Table A: Lists UL Recognized, CSA Accepted and TUV Certified configurations and performance capabilities as a Component
Supplementary Protector.
H SERIES - COMPONENT SUPPLEMENTARY PROTECTOR
CIRCUIT
VOLTAGE
CURRENT
SHORT CIRCUIT CAPACITY (AMPS)
CONFIGURATION
MAX
UL
CSA
TUV
WITHOUT BACKUP
FUSE
APPLICATION CODES
WITHOUT BACKUP
FUSE
WITHOUT BACKUP
FUSE
MINIMUM
POLES
RATING
65
FREQ.
DC
PHASE
FULL LOAD
1 - 32
UL
CSA
--
--
--
--
1
1
1
1
1
1
2
3
3000
---
3000
500
1500(PC1)
---
TC1, OL1, U1
TC1, OL1, U1
TC1, OL1, U3
TC1, OL1, U1
TC1, OL1, U3
TC1, OL1, U1
TC1, OL1, U3
TC1, OL0, U3
1 - 32
65
DC
---
1 - 25
80
DC
1000
1000
1500
1500
1500
800
1000(PC1)
1000(PC1)
1000(PC1)
1000(PC1)
1000(PC1)
TC1, OL1, U1
TC1, OL1, U3
TC1, OL1, U1
TC1, OL1, U3
TC1, OL0, U3
1
SERIES
26 - 32
1 - 32
80
DC
1000
1500
1500
1500
250
250
250
50/60
50/60
50/60
1 - 32
1
1 - 32
3
1 - Polarity Sensitive
Electrical
Maximum Voltage
Current Rating
Typical Protector Resistance
DCR and Impedance values are based on measurements
by the voltmeter ammeter method. Rated current is applied
for one hour and at a voltage not less than 20 volts. Ambient
temperature: 25 ℃; Tolerance: Below 10 amps +/- 25%;
Above 10 amps +/-35%
250VAC 50/60Hz 80 VDC
Standard current coils: 1.00, 2.50,
5.00, 7.50, 10.0, 15.0, 20.0, 25.0,
30.0, 32.0
SPDT: 10.1A-250VAC,
Auxiliary Switch Rating
1.0A-65VDC/0.5A-80VDC,
0.1A-125VAC (with gold contacts)
Impedance Chart
Series
Mechanical
Current rating in
amperes
DC-Ohms
0.85
50/60Hz-Ohms
0.87
Endurance
10,000 ON-OFF operations @ 6 per
minute; with rated current & voltage
1
2.5
5
7.5
10
15
20
0.13
0.15
0.036
0.019
0.011
0.0061
0.0051
0.0035
0.0026
0.035
0.018
0.01
0.006
0.005
0.003
0.0025
Physical
Number of Poles
Weight
1-3
Approx. 48 grams/pole (1.7 oz)
Series and Switch Only (with or
without auxiliary switch)
Internal Circuit Config.
25
30
Agency Approvals
UL Recognized under the Component Recognition Program as
Protectors, Supplementary (Guide QVNU2 File E75596)
UL standard 1077
CCC certified, Certificate No. 2010010307447291
CSA Accepted Circuit Breaker, CSA standard C22.2 No. 235
TUV certified to EN60934, Certificate No. R50204086
*Manufacturer reserves the right to change product specification without prior notice.
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: sales@carlingtech.com • www.carlingtech.com
|
H-Series – Dimensional Specifications: in. [mm] – Handle Actuator
3
LINE
LOAD
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: sales@carlingtech.com • www.carlingtech.com
|
4
H-Series – Dimensional Specifications: in. [mm] – Curved Rocker Actuator
#6-32[M3] THREAD *0.138[3.50]
DEEP
2 PLCS PER POLE
0.346 [8.80]
0.118 [3.00]
LINE
1.726
[43.83]
1.130
[28.70]
1.414
[35.90]
1.654
[42.00]
1-POLE
(HJ1)
1.382 [35.10]
0.126 [3.20]
LOAD
0.357 [9.08]
1.732 [44.00]
0.650 [16.51]
MAX
SCREW TYPE TEMINALS IN
SERIES TRIP CIRCUIT
CONFIGURATION SHOWN.
FOR OTHERS
CONFIGURATIONS, SEE
CIRCUIT AND TERMINAL
DIAGRAMS.
2.354 [59.78]
TAB(Q.C.)TYPE
2.354 [59.78]
SCREW TYPE
1.382 [35.11]
0.161 [4.08]
0.413 [10.50]
LINE
2-POLE
(HJ2)
1.130
[28.70]
1.260
[32.01]
OPTIONAL
"ROCKER GUARD"
LOAD
0.630 [16.00]
1.280 [32.51] MAX
1.197 [30.40]
LINE
3-POLE
(HJ3)
C
1.693
[43.01]
ON
C N
0.630
[16.00] TYP
LOAD
0.778 [19.75]
1.929 [49.00]
MAX
2-Ø0.156 [Ø3.96]
0.118 [2.99]
LINE
1.382
1.146
[35.10]
[29.12]
LOAD
0.640 [16.27]
POLE POLE POLE
1
2
3
PANEL CUTOUT DETAIL
MULTI-POLE IDENTIFICATION SCHEME
AS VIEWED FROM TERMINAL END OF
BREAKER.
+
+
TOLERANCE .005[ .12]
UNLESS OTHERWISE
SPECIFIED
NOTES:
1. ALL DIMENSIONS ARE IN INCHES [mm]
+
2. TOLERANCE .020 [.51] UNLESS OTHERWISE
SPECIFIED.
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: sales@carlingtech.com • www.carlingtech.com
|
H-Series – Dimensional Specifications: in. [mm] – Flat Rocker Actuator
5
PUSH-TO-RESET ACTUATOR
#6-32[M3] THREAD *0.138[3.50]
DEEP
2 PLCS PER POLE
0.118 [3.00]
LINE
1.726
[43.83]
1.130
[28.70]
1-POLE
(H31)
1.414
[35.90]
1.654
[42.00]
1.382 [35.10]
0.126 [3.20]
0.359 [9.12]
0.357 [9.06]
LOAD
SCREW TYPE TEMINALS IN
SERIES TRIP CIRCUIT
CONFIGURATION SHOWN.
FOR OTHERS
CONFIGURATIONS, SEE
CIRCUIT AND TERMINAL
DIAGRAMS.
1.732 [44.00]
0.650 [16.51]
MAX
2.353 [59.76]
TAB(Q.C.)TYPE
2.353 [59.76]
SCREW TYPE
0.118 [3.00]
LINE
2-POLE
(H71)
1.726
[43.83]
1.130
[28.70]
1.382 [35.10]
0.126 [3.20]
0.650 [16.51]
MAX
0.359 [9.12]
LOAD
LINE
1.382 [35.11]
0.161 [4.08]
1.130
[28.70]
2-POLE
(H72)
1.260
[32.01]
LOAD
0.630 [16.00]
1.280 [32.51] MAX
1.197 [30.40]
LINE
3-POLE
(H73)
1.693
[43.01]
0.630
[16.00] TYP
LOAD
0.778 [19.75]
1.929 [49.00]
MAX
2-Ø0.156 [Ø3.96]
0.118 [2.99]
1.382
1.146
[35.10]
[29.12]
0.640 [16.27]
PANEL CUTOUT DETAIL
MULTI-POLE IDENTIFICATION SCHEME
AS VIEWED FROM TERMINAL END OF
BREAKER.
+
+
TOLERANCE .005[ .12]
UNLESS OTHERWISE
SPECIFIED
NOTES:
1. ALL DIMENSIONS ARE IN INCHES [mm]
+
2. TOLERANCE .020 [.51] UNLESS OTHERWISE
SPECIFIED.
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: sales@carlingtech.com • www.carlingtech.com
|
6
H-Series – Dimensional Specifications: in. [mm] – PC Teminals
PRINTED CIRCUIT BOARD MOUNTING
TERMINAL CODE L
PRINTED CIRCUIT BOARD MOUNTING
TERMINAL CODE R
PRINTED CIRCUIT BOARD MOUNTING
TERMINAL CODE S & T
NOTES:
1. ALL DIMENSIONS ARE IN INCHES [mm]
+
2. TOLERANCE .020 [.51] UNLESS OTHERWISE SPECIFIED.
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: sales@carlingtech.com • www.carlingtech.com
|
H-Series – Dimensional Specifications: in. [mm] – PC Teminals
7
P.C. FOOT PRINT
FOR TERMINAL CODE R
P.C. FOOT PRINT
FOR TERMINAL CODE L
P.C. FOOT PRINT
FOR TERMINAL CODE S & T
NOTES:
1. ALL DIMENSIONS ARE IN INCHES [mm]
+
2. TOLERANCE .020 [.51] UNLESS OTHERWISE SPECIFIED.
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: sales@carlingtech.com • www.carlingtech.com
|
8
H-Series – Dimensional Specifications: in. [mm] – Circuit & Terminal
HANDLE POSITION VS. AUX SWITCH MODE
STANDARD C/B
CIRCUIT
BREAKER
MODE
HANDLE POSITION
AUX. SWITCH MODE
OFF
30°
OFF
NC NO
C
ON
30°
ON
NC NO
NC NO
C
C
ELECTRICAL TRIP
30°
OFF
O
0.381
[9.69]
0.047
[1.20]
0.806
[20.48]
TERMINAL DIMENSIONAL DETAIL & RATING
0.559
[14.19]
0.047
[1.20]
0.264
[6.70]
0.264
[6.70]
0.264
[6.70]
0.250
[6.35]
0.354
[9.00]
0.354
[9.00]
0.287
[7.29]
0.197
[5.00]
0.197
[5.00]
Ø0.067
[Ø1.71]
0.197
[5.00]
0.315
[8.00]
0.315
[8.00]
0.047
[1.20]
TAB (Q.C.)
UPTURN LUG
BUS
P.C. TERMINAL
90 FACING LEFT
90 FACING RIGHT
P.C. TERMINAL
STRAIGHT (SHORT)
P.C. TERMINAL
STRAIGHT (LONG)
TABLE A
TIGHTENING TORQUE
SPECIFICATIONS
1.197 [30.40]
1.012 [25.70]
THREAD SIZE
TORQUE
7-9 IN-LBS
[0.8-1.0 NM]
LINE
#6-32 & M3 MOUNTING
HARDWARE
#8-32 & M4 THREAD
TERMINAL SCREW
12-15 IN-LBS
[1.4-1.7 NM]
1.693 [43.00]
TABLE B
DEPTH
BEHIND PANEL
TERMINAL DESCRIPTION
LOAD
TAB (Q.C.)
MAIN
1.996 [50.70]
1.996 [50.70]
BARRIER FOR
SCREW TYPE
UL-RECOGNIZED MULTI-POLE
BREAKERS
.110 TAB (Q.C.)
2.467 [62.67]
2.252 [57.19]
AUX. SWITCH*
SOLDER TYPE
SEE TABLE B
1.854 [47.10]
* AVAILABLE ON SERIES TRIP AND SWITCH
ONLY CIRCUITS.
WHEN CALLED FOR ON MULTI-POLE
UNITS, ONLY ONE AUX. SWITCH IS
NORMALLY SUPPLIED, AS SHOWN IN
MULTI-POLE IDENTIFICATION SCHEME.
LINE
1.413 [35.90]
1.413 [35.90]
1. ALL DIMENSIONS ARE IN INCHES [mm]
2. TOLERANCE ±.020 [.51]
UNLESS OTHERWISE SPECIFIED.
LOAD
0.031 [0.80]
1.508 [38.30]
1.732 [44.00]
REF
0.120 [3.05]
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: sales@carlingtech.com • www.carlingtech.com
|
H-Series – Dimensional Specifications: in. [mm] – Circuit & Terminal
9
B,C
B,C
G
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: sales@carlingtech.com • www.carlingtech.com
|
10 H-Series Time Delay Values
PERCENT OF RATED CURRENT
NOTES:
Delay Curves 11,12,14,16,21,22,24,26: Breakers to hold 100% and must trip at 125% of rated current and greater within the time limit shown in this curve.
Delay Curves 10,20: Breakers to hold 100% and must trip at 150% of rated current and greater within the time limit shown in this curve.
All Curves: Curve data shown represents breaker response at ambient temperature of 77°F (25°C) with no preloading. Breakers are mounted in standard wall-mount position.
The minimum inrush pulse tolerance handling capability is 12 times the rated current. These values are based on a 60 Hz 1/2 cycle, 8.33 ms pulse.
AC
DC
Instantaneous
Ultrashort
Short
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: sales@carlingtech.com • www.carlingtech.com
|
H-Series Time Delay Values 11
AC
DC
Medium
Long
High Inrush AC
High Inrush DC
Short
Medium
Long
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: sales@carlingtech.com • www.carlingtech.com
|
12 H-Series Handle Actuator – Ordering Scheme
H A 3 — B 0 — 24 — 450 — 1 B 1 — D C
8
9
10
11
Rating
12
Agency
Approval
1
2
3
4
5
6
7
Terminal
Actuator
Color &
Legend
Mounting
Bezel/Barrier
Series
Actuator
Poles
Circuit
Aux/Alarm
Switch
Frequency
& Delay
Current Rating
1 SERIES
8 TERMINAL
H
1
Push ON 0.250 Tab (Q.C.)
Printed Circuitboard Terminals
2
3
Screw 8-32 w/upturned lugs
Screw 8-32 (bus type)
L
R
S
T
90 Facing Left
90 Facing Right
Straight
2 ACTUATOR1
A
B
Screw M4 w/upturned lugs
Screw M4 (bus type)
A
Handle, one per pole
B
Handle, one per unit
Straight, Long
3 POLE2
9 ACTUATOR COLOR & LEGEND
1
One
2
Two
3
Three
Actuator Color
White
I-O
A
C
F
ON-OFF
Dual
Legend Color
B
D
G
J
1
2
3
4
5
6
7
8
Black
White
White
White
White
Black
Black
Black
Black
Red
4 CIRCUIT
A
B
Switch Only (no coil)
Series Trip (current)
C4
G4
Series Trip (voltage)
Relay Trip (voltage)
Green
Blue
H
K
M
P
L
Yellow
Gray
N
Q
S
Orange
R
5 AUXILIARY/ALARM SWITCH
0
w/o Aux Switch
0.110 Q.C. term
0.110 Solder Lug
33
43
0.110 Q.C. term w/ gold contacts
0.110 PC term
13
23
10 MOUNTING/BARRIERS
MOUNTING STYLE
Threaded Insert
BARRIERS
BEZEL
1
6-32 x 0.195 inches
6-32 x 0.195 inches
ISO M3 x 5mm
no
domed
domed
domed
domed
flat
6 FREQUENCY & DELAY
30
31
32
34
DC, 50/60Hz, Instantaneous
DC, 50/60Hz,Ultra Short
DC, 50/60Hz, Short
DC, 50/60Hz, Medium
DC, 50/60Hz, Long
50/60Hz Short, Hi-Inrush
50/60Hz Medium, Hi-Inrush
50/60Hz Long, Hi-Inrush
DC Short, Hi-Inrush
DC Medium, Hi-Inrush
DC Long, Hi-Inrush
A
2
yes
no
03
104
11
DC 50/60Hz, Switch Only
DC Instantaneous
DC Ultra Short
DC Short
DC Medium
DC Long
50/60Hz Instantaneous
50/60Hz Ultra Short
50/60Hz Short
50/60Hz Medium
50/60Hz Long
B
3
ISO M3 x 5mm
yes
no
6-32 x 0.195 inches
6-32 x 0.195 inches
ISO M3 x 5mm
12
14
16
204
21
22
24
26
36
424
444
464
524
544
564
C
4
yes
no
flat
flat
D
ISO M3 x 5mm
yes
flat
11 MAX. APPLICATION RATING
65DC 240AC
A
D
M
80DC6
4
80VDC/250VAC7
12 AGENCY APPROVAL
7 CURRENT RATING (AMPERES)5
A
C
E
5
Without approvals
CODE AMPERES
UL Recognized, CSA Accepted, CCC Certified
UL Recognized, CSA Accepted, TUV Certified
UL Recognized, CSA Accepted, TUV Certified, CCC Certified
410 1.000
512 1.250
415 1.500
517 1.750
420 2.000
522 2.250
425 2.500
527 2.750
430 3.000
435 3.500
440 4.000
445 4.500
450 5.000
455 5.500
460 6.000
465 6.500
470 7.000
475 7.500
480 8.000
485 8.500
490 9.000
495 9.500
610 10.000
710 10.500
611 11.000
711 11.500
612 12.000
712 12.500
613 13.000
614 14.000
615 15.000
616 16.000
617 17.000
618 18.000
620 20.000
622 22.000
624 24.000
625 25.000
630 30.000
632 32.000
Notes:
1
Actuator Option A: handle tie pin, spacer & retainers provided unassembled on
multipole units.
Actuator Option B: Handle location as viewed from front of panel: 2 pole: left pole; 3
pole: center pole
Standard multipole units have all poles identical, except when specifying auxiliary switch
Auxiliary switch available on Series Trip and Switch Only circuits to 32A. On multipole
units, only one aux. switch is normally supplied, mounted in extreme right pole.
Separate Pole Type Voltage Coils not rated for continuous duty. Available only with
delay code 10 & 20. Only Available w/ Agency code C.
For other current ratings, consult factory.
26-32A Polarity sensitive, only available as 1 pole unit.
Voltage code 4 available to 25A max.
2
3
VOLTAGE RATING
CODE
RATING
TRIP VOLTS
A06 6DC
5DC
A65 65DC 55DC
J06 6AC 5AC
J12 12AC 10AC
J18 18AC 15AC
J24 24AC 20AC
J48 48AC 40AC
J65 65AC 55AC
K20 120AC 65AC
L40 240AC 130AC
B10 110DC 59DC
B20 120DC 65DC
4
A12 12DC 10DC
A18 18DC 15DC
A24 24DC 20DC
A32 32DC 25DC
A48 48DC 40DC
5
6
7
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: sales@carlingtech.com • www.carlingtech.com
|
H-Series Curved Rocker Actuator – Ordering Scheme
13
H J 3 — B 0 — 10 — 450 — 1 B 1 — D C
8
9
10
11
Rating
12
Agency
Approval
1
2
3
4
5
6
7
Terminal
Actuator
Color &
Legend
Mounting
Bezel/Barrier
Series
Actuator
Poles
Circuit
Aux/Alarm
Switch
Frequency
& Delay
Current Rating
(
)
1 SERIES VISI ROCKER
H
8 TERMINAL
1
Push ON 0.250 Tab (Q.C.)
Printed Circuitboard Terminals
2
3
Screw 8-32 w/upturned lugs
Screw 8-32 (bus type)
L
R
S
T
90 Facing Left
90 Facing Right
Straight
2 ACTUATOR1
A
B
Screw M4 w/upturned lugs
Screw M4 (bus type)
J
Vertical - Indicate OFF
K
Vertical - Indicate ON
Straight, Long
3 POLE2
9 ACTUATOR COLOR & LEGEND
1
One
2
Two
3
Three
Actuator Color
White
I-O
A
ON-OFF
Dual
B
G
J
2
3
4
5
6
7
8
Red
F
Green
Blue
H
4 CIRCUIT
A
B
Switch Only (no coil)
Series Trip (current)
C4
G4
Series Trip (voltage)
Relay Trip (voltage)
K
M
P
L
Yellow
Gray
N
Q
S
Orange
R
5 AUXILIARY/ALARM SWITCH
0
w/o Aux Switch
0.110 Q.C. term
0.110 Solder Lug
33
43
0.110 Q.C. term w/ gold contacts
0.110 PC term
13
23
10 MOUNTING/BARRIERS6
MOUNTING STYLE
Threaded Insert
HALF
BARRIERS ROCKER
GUARD
BRACKET
COLOR
Black
Black
Black
Black
Black
Black
Black
Black
White
White
White
White
White
White
White
White
Gray
1
6-32 x 0.195 inches
6-32 x 0.195 inches
ISO M3 x 5mm
no
no
6 FREQUENCY & DELAY
30
31
32
34
DC, 50/60Hz, Instantaneous
DC, 50/60Hz,Ultra Short
DC, 50/60Hz, Short
DC, 50/60Hz, Medium
DC, 50/60Hz, Long
50/60Hz Short, Hi-Inrush
50/60Hz Medium, Hi-Inrush
50/60Hz Long, Hi-Inrush
DC Short, Hi-Inrush
DC Medium, Hi-Inrush
DC Long, Hi-Inrush
033
10
11
12
14
16
20
21
22
24
26
DC 50/60Hz, Switch Only
DC Instantaneous
DC Ultra Short
DC Short
DC Medium
DC Long
50/60Hz Instantaneous
50/60Hz Ultra Short
50/60Hz Short
50/60Hz Medium
50/60Hz Long
A
2
yes
no
no
no
B
3
ISO M3 x 5mm
yes
no
no
6-32 x 0.195 inches
6-32 x 0.195 inches
ISO M3 x 5mm
yes
yes
yes
yes
no
36
424
444
464
524
544
564
C
4
yes
no
D
5
ISO M3 x 5mm
yes
no
6-32 x 0.195 inches
6-32 x 0.195 inches
ISO M3 x 5mm
E
6
yes
no
no
no
FIG.B
F
7
ISO M3 x 5mm
yes
no
no
6-32 x 0.195 inches
6-32 x 0.195 inches
ISO M3 x 5mm
yes
yes
yes
yes
no
G
8
yes
no
7 CURRENT RATING (AMPERES)5
H
9
ISO M3 x 5mm
yes
no
CODE AMPERES
6-32 x 0.195 inches
6-32 x 0.195 inches
ISO M3 x 5mm
FIG.
C
410 1.000
512 1.250
415 1.500
517 1.750
420 2.000
522 2.250
425 2.500
527 2.750
430 3.000
435 3.500
440 4.000
445 4.500
450 5.000
455 5.500
460 6.000
465 6.500
470 7.000
475 7.500
480 8.000
485 8.500
490 9.000
495 9.500
610 10.000
710 10.500
611 11.000
711 11.500
612 12.000
712 12.500
613 13.000
614 14.000
615 15.000
616 16.000
617 17.000
618 18.000
619 19.000
620 20.000
621 21.000
622 22.000
623 23.000
624 24.000
625 25.000
626 26.000
627 27.000
628 28.000
629 29.000
630 30.000
632 32.000
J
yes
no
no
Gray
P
K
Q
L
no
Gray
ISO M3 x 5mm
yes
no
no
Gray
6-32 x 0.195 inches
6-32 x 0.195 inches
ISO M3 x 5mm
yes
yes
yes
yes
Gray
yes
no
Gray
U
M
Gray
ISO M3 x 5mm
yes
Gray
11 MAX. APPLICATION RATING
65DC 240AC
A
D
M
80DC7
4
80VDC/250VAC8
VOLTAGE RATING
CODE
RATING
TRIP VOLTS
12 AGENCY APPROVAL
A06 6DC
5DC
A65 65DC 55DC
J06 6AC 5AC
J12 12AC 10AC
J18 18AC 15AC
J24 24AC 20AC
J48 48AC 40AC
J65 65AC 55AC
K20 120AC 65AC
L40 240AC 130AC
B10 110DC 59DC
B20 120DC 65DC
A
C
E
5
Without approvals
UL Recognized, CSA Accepted
UL Recognized, CSA Accepted, TUV Certified
UL Recognized, CSA Accepted, TUV Certified, CCC Certified
A12 12DC 10DC
A18 18DC 15DC
A24 24DC 20DC
A32 32DC 25DC
A48 48DC 40DC
Notes:
1
2
3
Half guard construction have OFF protection for actuator
Standard multipole units have all poles identical, except when specifying auxiliary switch
Auxiliary switch available on Series Trip and Switch Only circuits to 32A. On multipole
units, only one aux. switch is normally supplied, mounted in extreme right pole.
Separate Pole Type Voltage Coils not rated for continuous duty. Available only with
delay code 10 & 20. Only Available w/ Agency code C.
4
5
6
For other current ratings, consult factory.
On Visi-Rocker,Visi portion of rocker cannot be the same color as the bezel. Remainder
of rocker same color as bezel.
7
8
26-32A Polarity sensitive, only available as 1 pole unit.
Voltage code 4 available to 25A max.
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: sales@carlingtech.com • www.carlingtech.com
|
14 H-Series Flat Rocker Actuator – Ordering Scheme
H 3 3 — B 0 — 10 — 450 — 1 B 1 — D C
8
9
10
11
Rating
12
Agency
Approval
1
2
3
4
5
6
7
Terminal
Actuator
Color &
Legend
Mounting
Bezel/Barrier
Series
Actuator
Poles
Circuit
Aux/Alarm
Switch
Frequency
& Delay
Current Rating
1 SERIES
8 TERMINAL
H
1
Push ON 0.250 Tab (Q.C.)
Printed Circuitboard Terminals
2
3
Screw 8-32 w/upturned lugs
Screw 8-32 (bus type)
L
R
S
T
90 Facing Left
90 Facing Right
Straight
2 ACTUATOR1
A
B
Screw M4 w/upturned lugs
Screw M4 (bus type)
3
4
Single Color Vertical
Single Color Horizontal
7 Push–to–Reset, Single Color Vertical
8 Push–to–Reset, Single Color Horizontal
Straight, Long
9 ACTUATOR COLOR & LEGEND
Actuator Color
White
I-O
A
C
F
H
K
M
P
ON-OFF
Dual
Legend Color
3 POLE2
B
D
G
J
1
2
3
4
5
6
7
8
Black
White
White
White
White
Black
Black
Black
1
One
2
Two
3
Three
Black
Red
Green
Blue
Yellow
Gray
4 CIRCUIT
L
A
B
Switch Only (no coil)
Series Trip (current)
C4
G4
Series Trip (voltage)
Relay Trip (voltage)
N
Q
S
Orange
R
5 AUXILIARY/ALARM SWITCH
0
w/o Aux Switch
0.110 Q.C. term
0.110 Solder Lug
33
43
0.110 Q.C. term w/ gold contacts
0.110 PC term
10 MOUNTING/BARRIERS6
MOUNTING STYLE
Threaded Insert
13
23
BARRIERS PUSH-TO- BRACKET
RESET
no
COLOR
Black
Black
Black
Black
Black
Black
Black
Black
White
White
White
White
White
White
White
White
Gray
1
6-32 x 0.195 inches
6-32 x 0.195 inches
ISO M3 x 5mm
no
A
2
yes
no
no
6 FREQUENCY & DELAY
30
31
32
34
DC, 50/60Hz, Instantaneous
DC, 50/60Hz,Ultra Short
DC, 50/60Hz, Short
DC, 50/60Hz, Medium
DC, 50/60Hz, Long
50/60Hz Short, Hi-Inrush
50/60Hz Medium, Hi-Inrush
50/60Hz Long, Hi-Inrush
DC Short, Hi-Inrush
DC Medium, Hi-Inrush
DC Long, Hi-Inrush
no
033
10
11
12
14
16
20
21
22
24
26
DC 50/60Hz, Switch Only
DC Instantaneous
DC Ultra Short
DC Short
DC Medium
DC Long
50/60Hz Instantaneous
50/60Hz Ultra Short
50/60Hz Short
50/60Hz Medium
50/60Hz Long
B
3
ISO M3 x 5mm
yes
no
no
6-32 x 0.195 inches
6-32 x 0.195 inches
ISO M3 x 5mm
yes
yes
yes
yes
no
C
4
yes
no
36
424
444
464
524
544
564
D
5
ISO M3 x 5mm
yes
no
6-32 x 0.195 inches
6-32 x 0.195 inches
ISO M3 x 5mm
E
6
yes
no
no
FIG.B
no
F
7
ISO M3 x 5mm
yes
no
no
6-32 x 0.195 inches
6-32 x 0.195 inches
ISO M3 x 5mm
yes
yes
yes
yes
no
G
8
yes
no
H
9
ISO M3 x 5mm
yes
no
FIG.
C
7 CURRENT RATING (AMPERES)5
6-32 x 0.195 inches
6-32 x 0.195 inches
ISO M3 x 5mm
CODE AMPERES
J
yes
no
no
Gray
410 1.000
512 1.250
415 1.500
517 1.750
420 2.000
522 2.250
425 2.500
527 2.750
430 3.000
435 3.500
440 4.000
445 4.500
450 5.000
455 5.500
460 6.000
465 6.500
470 7.000
475 7.500
480 8.000
485 8.500
490 9.000
495 9.500
610 10.000
710 10.500
611 11.000
711 11.500
612 12.000
712 12.500
613 13.000
614 14.000
615 15.000
616 16.000
617 17.000
618 18.000
619 19.000
620 20.000
621 21.000
622 22.000
623 23.000
624 24.000
625 25.000
626 26.000
627 27.000
628 28.000
629 29.000
630 30.000
632 32.000
P
K
Q
L
no
Gray
ISO M3 x 5mm
yes
no
no
Gray
6-32 x 0.195 inches
6-32 x 0.195 inches
ISO M3 x 5mm
yes
yes
yes
yes
Gray
yes
no
Gray
U
M
Gray
Gray
ISO M3 x 5mm
yes
11 MAX. APPLICATION RATING
65DC 240AC
A
D
M
80DC7
4
80VDC/250VAC8
VOLTAGE RATING
12 AGENCY APPROVAL
CODE
RATING
TRIP VOLTS
A
C
E
5
Without approvals
A06 6DC
5DC
A65 65DC 55DC
J06 6AC 5AC
J12 12AC 10AC
J18 18AC 15AC
J24 24AC 20AC
J48 48AC 40AC
J65 65AC 55AC
K20 120AC 65AC
L40 240AC 130AC
B10 110DC 59DC
B20 120DC 65DC
UL Recognized, CSA Accepted, CCC Certified
UL Recognized, CSA Accepted, TUV Certified
UL Recognized, CSA Accepted, TUV Certified, CCC Certified
A12 12DC 10DC
A18 18DC 15DC
A24 24DC 20DC
A32 32DC 25DC
A48 48DC 40DC
X01 65AC special
catalog #
Notes:
1
2
3
Push-To-Reset actuator shave OFF portion of rocker shrounded
Standard multipole units have all poles identical, except when specifying auxiliary switch
Auxiliary switch available on Series Trip and Switch Only circuits to 32A. On multipole
units, only one aux. switch is normally supplied, mounted in extreme right pole.
Separate Pole Type Voltage Coils not rated for continuous duty. Available only with
delay code 10 & 20. Only Available w/ Agency code C.
4
5
6
For other current ratings, consult factory.
On Visi-Rocker,Visi portion of rocker cannot be the same color as the bezel. Remainder
of rocker same color as bezel.
7
8
26-32A Polarity sensitive, only available as 1 pole unit.
Voltage code 4 available to 25A max.
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: sales@carlingtech.com • www.carlingtech.com
|
15
* Intentionally left blank
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: sales@carlingtech.com • www.carlingtech.com
Worldwide Headquarters
Carling Technologies, Inc.
60 Johnson Avenue • Plainville, CT 06062-1177
Phone: (860) 793-9281 • Fax: (860) 793-9231
Email: sales@carlingtech.com • www.carlingtech.com
East Region Sales Office, CT • ersm@carlingtech.com
Midwest Region Sales Office, IL • mrsm@carlingtech.com
West Region Sales Office, CA • wrsm@carlingtech.com
Asia-Pacific Headquarters
Carling Technologies, Asia-Pacific Ltd.,
Kowloon, Hong Kong
Int + 852-2737-2277 • Fax: Int + 852-2736-9332
Email: sales@carlingtech.com.hk
Shenzhen, China • shenzhen@carlingtech.com
Shanghai, China • shanghai@carlingtech.com
Pune, India • india@carlingtech.com
Kaohsiung,Taiwan • taiwan@carlingtech.com
Yokohama, Japan • japan@carlingtech.com
Europe/Middle East/Africa Headquarters
Carling Technologies, Ltd.,
Devon, England 06062-1177
Int + 44 1392-364422 • Fax: Int + 44 1392-364477
Email: ltd.sales@carlingtech.com
GmbH, Germany • gmbh@carlingtech.com
SAS, France • sas@carlingtech.com
REV_CB_H_0212
相关型号：
HA3.3-10C7AM
CAPACITOR, TANTALUM, SOLID, POLARIZED, 10 V, 3.3 uF, THROUGH HOLE MOUNT, AXIAL LEADED
VISHAY
HA3.3-10C7RM
CAPACITOR, TANTALUM, SOLID, POLARIZED, 10 V, 3.3 uF, THROUGH HOLE MOUNT, RADIAL LEADED
VISHAY
HA3.3-20N5AM
CAPACITOR, TANTALUM, SOLID, NON-POLARIZED, 20 V, 3.3 uF, THROUGH HOLE MOUNT, AXIAL LEADED
VISHAY
HA3.315C8AM
CAPACITOR, TANTALUM, SOLID, POLARIZED, 15 V, 3.3 uF, THROUGH HOLE MOUNT, AXIAL LEADED
VISHAY
HA3.320N5AJ
CAPACITOR, TANTALUM, SOLID, NON-POLARIZED, 20 V, 3.3 uF, THROUGH HOLE MOUNT, AXIAL LEADED
VISHAY
HA3.320N5RK
CAPACITOR, TANTALUM, SOLID, NON-POLARIZED, 20 V, 3.3 uF, THROUGH HOLE MOUNT, RADIAL LEADED
VISHAY
HA3.320N5RM
CAPACITOR, TANTALUM, SOLID, NON-POLARIZED, 20 V, 3.3 uF, THROUGH HOLE MOUNT, RADIAL LEADED
VISHAY
HA3.32C3AM
CAPACITOR, TANTALUM, SOLID, POLARIZED, 2 V, 3.3 uF, THROUGH HOLE MOUNT, AXIAL LEADED
VISHAY
HA3.32C3RM
CAPACITOR, TANTALUM, SOLID, POLARIZED, 2 V, 3.3 uF, THROUGH HOLE MOUNT, RADIAL LEADED
VISHAY
HA3.335C9AK
CAPACITOR, TANTALUM, SOLID, POLARIZED, 35 V, 3.3 uF, THROUGH HOLE MOUNT, AXIAL LEADED
VISHAY
©2020 ICPDF网 联系我们和版权申明